Shijiazhuang Zhengzhong Technology Co., Ltd
Global Leading Bolted Tanks Manufacturer
Add to Cart
Above Ground With High Acid And Alkali Resistance Glass Lined Liquid Storage Tank
How is the production process of GFS tank ?
1. Get raw steel sheet : First measure the thickness with micrometer and see whether it matches the raw steel sheet to be used . Then mark down the batch number .
2. Punching , corner cut and edging : Before punching set all the dates as per drawing in the computer and then put steel sheet on the automatic laser cutting machine , which will cutting the holes according to the setting datas .
3. Press Arc :According to the diameter , determine the radian of the pressure plate ; clean up the pressure machine and the plate surface ; be careful do not press the steel emery onto the plate .
4. Short blasting : Before the blasting , shifting the steel emery ( steel grit) and add it to the blasting machine ; hoist the rough steel into the blasting machine.
5. Glaze Mortar Adjustment : Firstly , the ground coat glaze mortar must be shifted . Secondly , adjust the glaze mortar according to the specification .
6. Spray : Before the spray , check the plate is clean and no defects , use sandpaper to clean the surface well and then put them into the automatic spray machine , start spraying .
7. Buring : After finish spray put the steel sheet to the high temperature oven , the burning temperature between ground enamel and top enamel are different . The temperature of ground enamel is 880-900 degree and the buring time is about 8-20 minutes , while the top ground the temperature is 780-820 degree and the burning time is about 6-16 minutes .
9. Production QC : chemical elements inspection ; holiday test ; Coating thickness gauge ; Out appearance checking ; Anti-acid&alkaline test ; Anti-high temperature test ; Adhesion test ; Adhesion test
10. Package : Double checking is required before packaging, confirm the plate’s code and quality . The steel plates is separated with each other by PE foam , to avoid any damage on the coating surface . And the whole pallet steels are covered by a outer film, tied by steel belt .
Advatanges of GFS tank
|
1. superior performance in corrosion resistance and against rust |
|
2. factory fabrication tank . No painting or spray on erection site |
|
3. minimal maintenance cost |
|
4. No need crane or other large equipment during erection. |
|
5. not subjected to severe weather and environment |
|
6. can be designed to future expansion, dismantle or re-movement. |
Comparation of various tanks
|
No |
Item |
Cement tank |
Carbon steel tank |
Enamel tank |
|
1 |
Construction time |
>90 day |
> 60 days |
<15 days |
|
2 |
Process technology demand |
strict |
Welding difficult |
easy |
|
3 |
Installation technology demand |
Strict & complicated |
difficult |
Convenient & easy |
|
4 |
Removal |
impossible |
difficult |
easy |
|
5 |
Appearance |
normal |
normal |
good |